

PA11-GF 3450 (Drums of 18kg)
(€62.00 per kilo)
THE IDEAL SOLUTION FOR BIG PARTS, AND WHEN HIGH TEMPERATURE RESISTANCE IS A MANDATORY REQUIREMENT
The PA11-GF 3450 fine polyamide is ideal for mechanical parts in the engine compartment, complex end-use parts for a wide range of applications from Automotive, Aerospace to Military industries
Specifications :
- Fine granulometry
- Similar to injected PA6-MD30 or PP-GB
- PA11 range elongation and elasticity, with increased mechanical properties thanks to the glass beads filling.
- Resistance in high temperatures
- Low shrinkage, suitalble for big parts
- Refresh rates at 50% (limited to 8-10 cycles) for lower operating costs
*Performance characteristics of these materials may change according to product application, operating conditions, material combined or end use.
Data sheet
Data sheet
- Material Type
- Powder
- Appearance
- Light Grey
- Bulk Density
- 0.95 g/cm³
- Grade
- 1
- Average Particle Size
- 55 µm
- Density of Parts
- 1.40 g/cm³
- Moisture absorption
- 0.85% (ASTM D570)
- Melting Point
- 200°C
- Heat Deflection 1.8 Mpa
- 133°C (ASTM D648)
- Tensile Strenght
- 33 MPa
- Tensile Modulus
- 3450 MPa
- Elongation break (XY)
- 12%
- Elongation break (Z)
- 9%
- Flexural Strength
- N/A
- Flexural Modulus
- 2300 MPa
- Impact Strength (unnotched izod)
- N/A
- Shore Test
- N/A
- Resistivity Domain
- Antistatic
- Upper facing processed & blasting, Surface Ra
- 11 µm
- Upper facing after Finishing, Surface Ra
- 8 µm
- Testing standard / Certification
- ISO