PLASTCure Model 320 (5kg Canister)

€1,050.00

(€210.00 per kilo)

Tax excluded
1600510

HIGH ACCURACY AND EXCELLENT RESOLUTION FOR DENTAL MODEL APPLICATIONS

Broad range of dental model applications including thermoforming.

Dedicated for dental 3D printing, PLASTCure Model 320 is perfectly adapted for the manufacturing of dental models for a wide variety of dental applications. Highly suitable for thermoforming applications.

Specific features :

- High accuracy and excellent resolution

- Ability to produce sharp edges and detailed parts

- High green strength and good mechanical properties

* Performance characteristics of these materials may change according to product application, operating conditions, material combined or end use.

Data sheet

Data sheet

Material Type
Resin
Compatible wavelength
365 - 385 - 405nm
Appearance
Beige opaque
Liquid Density (g/cm³)
1.11
Viscosity @ 28°C (cps)
350 - 550
Hardness (Shore D)
85 -90
Tensile Modulus (MPa) ASTM D638
2800 - 3100
Tensile Strength (MPa) ASTM D638
72 - 76
Elongation at Break (%) ASTM D638
5 - 7
Flexural Strength (MPa) ASTM D790
110 - 120
Flexural Modulus (MPa) ASTM D790
2300 - 2600
Izod Impact (J/m) ASTM D256A
N/A
HDT @ 0.46 MPa (°C) ASTM D648
70 - 80
Residual ash content
Not relevant
Water Absorption (%) ASTM D570
0.6 - 0.8